A cement furnace Products is crucial in the process of making cement. Cement-kiln is a large cylinder in which raw materials (such as limestone, clay and sand) are heated into cements at very high temperatures. Making cement is a multi-step process. To begin with, the raw material is broken into small fragments. They are then mixed and grounded to a powder form. The mixture is then introduced to a furnace where it is subsequently heated causing the material to solidify by coagulating in lumps known as "clinker. “Establish that is a very critical stage of cement manufacturing. ”
The cement furnace manufactures strong and long-lasting cements, which is necessary material for a construction project. Cement of such type is used in the construction of various buildings, from homes to skyscrapers. The Cement made can survive harsh weather like heavy rains, high winds and even snow. With this strength it is considered a popular choice for builders.
The cement furnace in Datong does one thing, and it does that one thing well – producing good-quality cement. This allows the cement to be relied upon by builders, since it is consistent whenever they use it. It works well for any type of building project, from industrial facilities to residential homes. The furnace provides accurate control over the raw material from start to finish, ensuring the final product complies with all essential quality norms and regulations.
As well as useful for construction, the cement furnace is also good for the environment :) We are passionate here at Datong about doing our bit to reduce carbon emissions. In other words, we want to lower the amount of carbon dioxide we pump into the atmosphere. This is a subject that we can address from different areas; one of them through the support of clean energies and solutions to waste problems.
The cement kiln helps us meet these needs by enabling us to produce cement with lower energy requirements. It also reduces our carbon emissions, the more energy we use, the less carbon we produce. We are always seeking new avenues for innovation in our operations, like finding solutions that allow us to utilize different types of fuels or trapping and storing carbon emissions before they reach the atmosphere.
Throughout the entire manufacturing process, we follow key best practices to make sure that our Cement Kiln runs smoothly and efficiently. This means looking after our gear, doing regular maintenance and inspections of our equipment to spot any developing problems early. We train our employees periodically to help them understand facts behind the processes which are carried out and operate the furnace smoothly and safely.
The first is a topic we are paying particular attention to carbon capture technology. With the potential to save tons of carbon our new promising technology can have a big impact on sustainability. We are also studying alternative fuels (biomass, waste heat). By leveraging these resources, refractory cement we can reduce our dependence upon fossil fuels and even more limit castable refractory cement.
Datong is a leading national corporation that has been able to pass the ls0900l certificate for quality system, the is014001 certification for the environmental management system and OHSAS1800 certification for occupational safety and health. It was listed on 7 April 2016 under the stock code 836236. Nowadays, it has become the most comprehensive and largest high-quality aluminum based refractory raw base. Each tank is scrutinized with Cement furnace, radiography test, etc. The most sophisticated production machine in the world, strict quality control on every step of production. Each and every detail is worthy of our close attention, and every single action is an integral element of our workforce.
Cement furnace Datong Refractories Co., Ltd was established in 2008. It is a high-tech joint-stock private enterprise in Henan Province, which specializes in the development, production and distribution of premium refractive raw materials and related products. After years of continuous development the company now has an annual output of 30.000 tons of high-temperature alumina powder, 20.000 tons of magnesium aluminum spinel (electric melting the sintering) 10, 000 tons of calcium aluminate, 50, 000 tons white fused alumina, tabular alumina. There are 8, 000 tons of non-crystalline calcium aluminate, 30000 tons of high-alcohol cement, and 50, 000 tonnes of various castings and shaped products.
We offer Cement furnace raw materials, premium products and services as we grow with our customers. However, at the same time. Datong Company wants to create an all-win-win partnership with its partners, enabling it to provide its customers with better and supply them with top quality products.
Datong has a budget of 10 million yuan and has built a chemical analysis laboratory and a micro-powder testing laboratory with a scanning electron microscope Application laboratory, high temperature laboratory and pilot base, including more than 40 sets of testing equipment, including SEM and Cement furnace, XRD, XRF, laser particle size analyzer, as well as other top-of-the-line analysis and testing equipments. The technical center employs more than 10 technical personnel with 1 senior engineer and two engineers. The center maintains the close collaboration with Wuhan University of Science and Technology Sinosteel Luoyang Insimuie of refractories research, University of Science and Technology Liaoning, Zhengzhou University and other research institutes within the area of refractory.
Copyright © Kaifeng Datong Refractories Co.,Ltd All Rights Reserved. - Privacy Policy- Blog
EN
AR
HR
CS
DA
NL
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
LT
SR
SK
UK
VI
HU
TH
TR
MS
GA
CY
AZ
LO
LA
MN
NE
MY
KK
UZ
